Instruction manual

A-1
A P P E N D I X A
Technical Specifications
Transmission Process Control
Film Width 35mm fixed slot or 1.4–6.0in. adjustable
Measurement Speed 1.1 to 1.4 in./sec. (1.2 in./sec. typical)
Spectral Response Status M
Density Range 0–4.0D
Density Accuracy ±.02D (0–3.0D), ±1% (3.1–3.4D)
±3% (3.5–4.0D)
Density Repeatability ±.01D (0–3.0D)
Control Strip Measurement Area 0.375” (length) x 0.5” (wide) minimum
Reflection (paper) Process Control and Printer Balance
Paper Width 1.4–6.0in. adjustable slot
Measurement Speed 1.3in./sec.
Control Strip Measurement Area 0.375” L x 0.5” W minimum
Printer Balance Measuring Area 0.75” diameter minimum
Spectral Response Status A
Density Range 0–2.5D
Density Accuracy ±.02D
Density Repeatability ±.01D
General Specifications
AC Adapter 12VDC @ 0.7amp
115VAC (P/N SE30-61)
230VAC (P/N SE30-62)
Instrument Dimensions 7.2” W x 6.0” D x 2.75” H
(182.8mm W x 152.4mm D x 69.mm H)
Specifications and design subject to change without notice.