Instruction manual

SECTION THREE
3-4
• You can save and exit the configuration at anytime without editing all
options. This is accomplished by simultaneously pressing key l and
key ll when SAVE is displayed in the screen.
• Configuration can be exited at anytime without saving changes by
simultaneously pressing key lll and key llll (MENU keys).
1. Press key ll (cnfg) located on the Function Menu screen (p3) to enter
Page1 Configuration screen.
FUNCTION MENU
p3 cnfg cal
load
2. Page 1 Configuration Screen
• Press key lll (TONE) to page through and select a beeper tone option
(OFF, SOFT, and LOUD).
• Press key llll (NET) to page through and select a networking option
(OFF, OUT, IN, and I&O. Note, only set if network modem is used.
• After editing Page 1 Configuration options, press key l (P1) to advance
to Page 2 Configuration screen.
CNFG
P1
TONE NET
SAVE
3. Page 2 Configuration Screen
• Press key ll or key lll (IOpreset) once to enter I/O preset menu.
CNFG
P2 IOpreset
• Press key ll or key lll to page through and select a preset options
(CUSTOM, REPORT, SPRD-SHT, k:TNetA, etc.).
• After selecting I/O preset option, press key llll (P2) to load preset and
advance to Page 2a Configuration screen.
• If you do not want to load a preset, press key l (P2) to advance to
Page 2a Configuration screen.
CNFG
P2 CUSTOM
load