Instruction manual

SECTION ONE
1-6
ADJUSTING THE PAPER GUIDES
To accommodate various size paper strips, the instrument has an adjustable
paper guide on each side of the strip entrance. Each paper guide has a pointer
(triangle) that is aligned with a number on the guide rail. The guide setting
numbers are shown on the instrument display when a paper strip is selected.
The paper guide rail has setting marks that range from “9-30” to the left and
right of the center diamond. Each mark (stop) is 1/10” increment—10 stops
equal one inch. The instrument automatically displays the proper guides
settings for the selected strip (see below).
20
10
10
30
READ k:RA–4 ALL
AT
<
18
18
>
other
20 30
The paper guides are moved by sliding them to the left or right.
To accommodate 35mm wide strips, the instrument has a special stationary
guide located above the diamond
Instrument Display
Paper Guide
Pointer
Center Diamond
Center Alignment Line
35mm Slot
Stationary Guide
35mm Film
Paper Strip
Film Strip