Instruction manual

SECTION ONE

1-4

USER INTERFACE

The 890 instrument incorporates a three page menu system. Menu pages are

displayed by continually pressing keyswitch l (p#) on the instrument. The

first page contains all the predefined control strips. The last two pages

provide access to the instrument setup options and strip measurement data.

Main Menu

• pap (paper) - accesses the paper measurement channel. The format

selected remains selected until changed.

• film - access the film measurement channel. The format selected remains

selected until changed.

• bal (printer balance) - accesses the printer balance measurement channel.

The format selected remains selected until changed.

Function Menus

• view - used to view data of the last strip measured.

• xmit (transmit)- used to manually transmit data of the last strip

measured—via RS-232 port.

• cal (calibration) - used for calibration.

• cnfg (configuration) - used to access system configuration options.

• load - for updating the instrument’s firmware (see Appendix E).

MAIN MENU

pap

film bal

FUNCTION MENU

view

xmit

FUNCTION MENU

cnfg load

cal