Installation Instructions

Operation / Instructions
The XPOWER High Velocity Air Mover is intended to move air
and to dry floors, walls, furniture, etc. Durable and easy to operate
with an effective balance of static pressure and airflow suitable for
a variety of applications.
1.
XPOWER Air Movers are shipped ready to be put into
service. Prior to plugging in the unit into the power source,
inspect completely for any shipping damage.
2. Plug the electrical cord into the power outlet.
3.
Carefully place the Air Mover unit on a stable, flat dry
surface.
4. The unit has four position capability to aim airflow across
flat surfaces or angled upward.
5.
Turn the switch to desired speed and make sure it is
operating correctly.
6. All Air Mover in operation must be supervised at all times.
AIR MOVER
STORAGE
:
Air Movers can
be stacked
(up to 4) on their
sides for storage.
NOTICE:
1.Stacking
feature is not
secure for
transportation.
2.Remove the
filters before
stacking.
Timer Instruction (Applicable for Model X-430)
Use the Timer to set the preferred time from
1 min to 180 min.