Installation Instructions

To use as a dryer:
connect the hose to the
front hose connector.
To use as a vacuum:
connect the hose to
the rear cover connector.
Introduction
XPOWER model numbers B-3 / B-4 / B-5 are ETL / C-ETL Certified Professional Level 2-in-1 Pet
Dryers + Vacuums with the finest engineering design. XPOWER Pet Dryers + Vacuums help dry
your pets safely and quickly – whether small or large breeds, or pets with short or long hair!
Special Features:
 Extra low noise level.
 2-in-1 function: Pet Dryer and Vacuum.
 Powerful motor from 2 HP to 4 HP.
 Optimal Integration of motor and housing design.
 High impact and rugged ABS housing material.
 Easy-to-change and washable filter.
 2-speed settings for B-3 or variable speed settings for B-4 & B-5.
 ETL / C-ETL Certified.
 6 ft (B-3) or 8 ft (B-4 & B-5) heavy duty flexible hoses.
 Heavy duty blower nozzles for different pet drying applications.
 Compact, lightweight and portable, ideal for “house calls” and home use.
- 1 -
- 2 -
Operation
1. Place the dryer on a flat surface. Plug the electrical cord into a 3-prong GFCI outlet.
2. To use as a dryer, connect the hose to the front hose connector and attach the desired nozzle.
Keep the inlet filter and crossed cover in place on the rear cover. Turn on the switch to the desired
speed.
3. To use as a vacuum, detach the hose from the front connector, then remove the inlet filter and
crossed cover of the rear cover. Connect the hose to the rear cover connector and attach the desired
nozzle. Turn on switch to the desired speed to vacuum.
4. All units in use must be supervised at all times.