User's Manual

15
4.2.1.11. Optional. If you select Specify an IP Address, type the
WAN IP Address, Subnet Mask, ISP Gateway Address and DNS
in the boxes, seen in FIGURE 4-3. You can collect such
information from your ISP.
FIGURE 4-3: WAN IP Address - Specify an IP Address
4.2.1.12. If your ISP uses PPPoE (Point to Point Protocol over
Ethernet), click Enable next to PPPoE Login; otherwise, click
Disable. For detailed instructions on how to set the PPPoE
Login parameters in FIGURE 3-4, see To Set PPPoE Login
Parameters below.
4.2.113. If you want to use UPNP (Universal Plug and Play) to
plug devices like PCs, routers and others into a network and to
automatically know about each other, click Enable next to UPNP;
otherwise, click Disable.
4.2.1.14. When you have completed all the settings, click Apply,
or click Cancel to undo your changes.
Note :
If
y
ou choose to obtain an IP Address automaticall
y,
ski
p
Ste
p
11.
Notes :
Using PPPoE, your ISP can authenticate your connection with a specific
user name and password for security issues.
If you enable PPPoE, make sure to uninstall all existing applications on
any computer in your network
.