User's Manual

ADVANCED FUNCTIONS: SNMP
Page 72 of 77
It is a string of the maximum of 255 alphanumeric
characters.
3. To send SNMP trap messages to any NMS, type up to 6 trap receiver’
IP addresses in the SNMP Trap Host IP Address 1 – SNMP Trap Host IP
Address 6 boxes.
4. To secure SNMP with community names, do the following:
No. Action
1
Type a string in the SNMP Community box, like Public.
2
Select an option from the SNMP Access drop-down list, for
example, Read.
3
Click Add. If you want to add more community names, do
Step 4.1 – Step 4.3 again.
Note – Usually, we define a string of “Public” for Read
access and “Private” for Read-Write access.
5. When you have completed editing all the settings, click Apply, or click
Cancel to undo your changes.
To Delete an Existing SNMP Trap Receiver:
1. On the SNMP page, for any SNMP trap receiver that you want to
delete, enter 0.0.0.0 in the SNMP Trap Host IP Address box.
2. Click Apply.
To Delete SNMP Community Names:
1. On the SNMP page, for any SNMP community name that you want to
delete, click Delete in the corresponding row.
2. Click Apply.