User's Manual

BASIC FUNCTIONS: SETUP
Page 13 of 77
7. If you don’t want to use Daylight Savings time, click Disable. If you
select to disable the Daylight Savings, Daylight Period will not take
effect any more.
8. Optional. Review the Device IP Address and Subnet Mask next to
LAN IP Address and change the information if necessary.
Notes
▪ Device IP Address and Subnet Mask are invisible to users
on the LAN (Local Area Network) only.
▪ In most cases, you need not make any change to LAN IP
Address. If you change the LAN IP Address with DHCP
enabled, you need to restart your client PCs; otherwise,
you need reconfigure your client’s IP addresses manually.
9. If you have enabled the DMZ feature on the DHCP page, review
the DMZ IP Address and Subnet Address next to DMZ IP Address
and change the information if necessary.
10. For WAN IP Address (Wide Area Network, also called Public IP),
choose either Obtain an IP Address automatically or Specify an IP
Address if your ISP has assigned you with static IPs).
Note - If you choose to obtain an IP Address automatically,
skip Step 11.
11. Optional. If you select Specify an IP Address, type the WAN IP
Address, Subnet Mask, ISP Gateway Address and DNS in the boxes,
seen in FIGURE 3-3. You can collect such information from your
ISP.
FIGURE 3-3: WAN IP Address - Specify an IP Address