WLAN 11g Broadband Router Quick Start Guide 0
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. Product Name: X-Micro WLAN 11g Broadband Router Model Name : XWL-11GRIX MAX. OUT POWER COUNTRY Spain France France Italy UK Netherlands Germany Austria Belgium Switzerland Luxemburg Ireland Portugal Norway Denmark Finland Iceland Greece Lichtenstein Sweden 2400-2483.5 MHz 2400-2454 MHz 2454-2483.5 MHz 2400-2483.5 MHz 2400-2483.5 MHz 2400-2483.5 MHz 2400-2483.5 MHz 2400-2483.
FCC INFORMATION FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules.
System Requirements - Broadband Internet access - RJ-45 Ethernet cable(s) - Desktop or notebook PCs with Ethernet or wireless network adapters Netzteil To connect the Router 1. Make sure all equipment - desktop or notebook PCs, and the cable or DSL modem – is turned off, and the power adapter is not connected to the Router. 2. Connect the WAN port of the Router to your cable or DSL modem, Ethernet server or hub by means of an appropriate RJ-45 cable. 3.
7. Click X-Micro WLAN 11g Broadband Router 8.
] FIGURE 1: Logon dialog box 9. Type admin in the User Name box. 10. Type the password in the box. Note - The default password is 1234. You can change the password on the Tools page. For detailed instructions, see To Change the Administrative Password for Your Router. Optional. To log on to the Administration Tool once for all, select the check box of Save this password in your password list. 11. Click OK. The X-Micro Router Administration Tool appears.
www.x-micro.
