- X-Micro Broadband Router User Manual

USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER Version: 2.6
19
Apply Changes Click the Apply Changes button to complete the new
configuration setting.
Reset Click the Reset button to abort change and recover the
previous configuration setting.
3.3.8 WAN Interface Setup
This page is used to configure the parameters for wide area network that connects
to the WAN port of your X-Micro WLAN 11b Broadband Router. Here you may
change the access method to Static IP, DHCP, PPPoE or PPTP by click the item
value of WAN Access Type.
A. Static IP
Screen snapshot – WAN Interface Setup – Static IP
Item Description
Static IP Click to select Static IP support on WAN interface. There
are IP address, subnet mask and default gateway settings
need to be done.
IP Address If you select the Static IP support on WAN interface, fill
in the IP address for it.
Subnet Mask If you select the Static IP support on WAN interface, fill