- X-Micro Broadband Router User Manual

USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER Version: 2.6
17
Item Description
Enable Wireless
Distribution System
Click the check box to enable wireless distribution
system. Refer to 4.20 What is Wireless Distribution
System (WDS)?
MAC Address Fill in the MAC address of AP to register the wireless
distribution system access capability.
Comment Fill in the comments for the registered AP.
Apply Changes Click the Apply Changes button to register the AP to new
configuration setting.
Reset Click the Reset button to abort change and recover the
previous configuration setting.
Current Access Control
List
It shows the registered APs that are allowed in the
wireless distribution system.
Delete Selected Click to delete the selected clients that will be removed
from the wireless distribution system.
Delete All Click to delete all the registered APs from the wireless
distribution system allowed list.
Reset Click the Reset button to abort change and recover the
previous configuration setting.
3.3.7 LAN Interface Setup
This page is used to configure the parameters for local area network that connects
to the LAN ports of your X-Micro WLAN 11b Broadband Router. Here you may
change the setting for IP address, subnet mask, DHCP, etc.