- X-Micro Broadband Router User Manual

USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER Version: 2.6

Beacon Interval Set the Beacon Interval, value can be written between 20

and 1024 ms.

Refer to 4.12 What is Beacon Interval?

Data Rate Select the transmission data rate from pull-down menu.

Data rate can be auto-select, 11M, 5.5M, 2M or 1Mbps.

Preamble Type Click to select the Long Preamble or Short Preamble

support on the wireless data packet transmission.

Refer to 4.13 What is Preamble Type?

Broadcast SSID Click to enable or disable the SSID broadcast function.

Refer to 4.14 What is SSID Broadcast?

IAPP Click to enable or disable the IAPP function.

Refer to4.19 What is Inter-Access Point Protocol(IAPP)?

Apply Changes Click the Apply Changes button to complete the new

configuration setting.

Reset Click the Reset button to abort change and recover the

previous configuration setting.

3.3.4 Wireless Security Setup

This page allows you setup the wireless security. Turn on WEP or WPA by using

encryption keys could prevent any unauthorized access to your wireless network.

Screen snapshot – Wireless Security Setup