Certificate Of Compliance

HBCS Report # FCC_12003 Page 7 of 17
7. Method of Monitoring EUT Operation
LED’s on the front of the device was monitored for any errors. Also one of the keys was pressed
on the device to produce a constant character on the screen of a laptop which was observed
throughout the testing test.
8. Mode of Operation
The EUT will be configured in its normal operating mode.
9. Modifications
9.1 Modifications to EUT
Modifications were made to the EUT to meet Radiated Emissions requirements. 0.01uF
by pass capacitor was placed near the U1 power pins on the Printed Circuit Board.
9.2 Modifications to Test Standard
No Modifications were made to the test standard.
10. Disposition of EUT
The test sample including all support equipment submitted to H.B Compliance Solutions for
testing will be returned to PI Engineering upon completion of testing & certification