Certificate Of Compliance

HBCS Report # EMC_12003 Page 17 of 36
The peak value of the test voltage shall be with 1.40 and 1.42 times its r.m.s. value and shall be
reached within 87degrees to 93degrees after the zero crossing. This requirement does not apply when
Class A or B equipment is tested.
Equipment Classification
Class A: Balanced three-phase equipment and all other equipment, except that stated in one of the following
classes.
Class B: Portable tools and arc welding equipment which is not professional equipment.
Class C: Lighting equipment, including dimming devices.
Class D: Equipment having specified power according to EN 61000-3-2 of P<600W, of the following equipment
types:
Personal Computers, Personal Computer Monitors and Television Receivers
Power Input Current Harmonics Test Data
Test Parameters
Equipment Class
Voltage THD (%)
Volt.THD Out of Spec.
RMS Voltage (V)
Max. Power (W)
Mean Power (W)
Power Factor
Frequency (Hz)
Current THD (%)
Peak Current (A)
RMS Current (A)
Fund.Current (A)
Comments
None
EUT Operating Modes
Deviations From Test Standard
None
Results
N/A