Certificate Of Compliance

HBCS Report # FCC_12003 Page 17 of 17
(3) When the device is so small to for such use that it is not practicable to place the statement
specified under paragraph (b)(1) of this section on it, such as for CPU board or plug-in circuit board peripheral
device, the text associated with the logo may be placed in a prominent location in the instruction manual or
pamphlet supplied to the user. However, the unique identification (trade name and model number) and the
logo must be displayed on the device.
(4) The Label shall not be a stick-on, paper label. The label shall be permanently affixed to the
product and shall be readily visible to the purchaser at the time of purchase, as described in §2.2925(d) of
this chapter. "Permanently affixed" means that the label is etched, engraved, stamped, silk-screened,
indelibly printed, or otherwise permanently marked on a permanently attached part of the equipment or
on a nameplate of metal, plastic, or other material fastened to the equipment by welding, riveting, or
permanent adhesive. The label must be designed to last the expected lifetime of the equipment in the
environment in which the equipment may be operated and must not be readily detachable.
END OF TEST REPORT