XFCK030 X-6 Cubed Conversion Kit Manual V1.0

K 030 X – 6 Cubed
Instruction Manual v1.0
B 4.2 Disassembly Page 9
TRANSMISSION
11) Remove the gear cover. Two
flat head screws from the
bottom and two button heads
from the top. Save the flat
head screws for Inst. # E14
and the button heads for #
F7.
12) Remove the two 5/8” flat head screws that hold
the wing mounts to the shock tower and save
the screws for Inst. # B1.
13) Remove the long bolt that holds the wing
mounts to the transmission. This bolt will not
be used. Remove the left wing mount.
14) Remove the two bolts holding the transmission in the car. Save these 3/8”
cap heads for Inst. # D 7 . The transmission should lift out now.