XFCK030 X-6 Cubed Conversion Kit Manual V1.0

K 030 X – 6 Cubed
Instruction Manual v1.0
B 4.2 Disassembly Page 7
4) From beneath the chassis, remove the
two flat head screws which hold the
bumper to the chassis & bulkhead.
Save the bumper and screws for re-use.
5) Still working beneath the chassis,
remove the two flat head screws which
hold the bulkhead to the chassis. Save
these screws for re-use.
6) From the top, remove the three
screws and washers that hold the
top plate to the chassis. Save the
screws for re-use.
7) Carefully remove the front suspension and steering assembly and set it
aside for re-use. Make sure the steering linkage stays in place.
Front end is done! Let’s do the driveline.