XFCK030 X-6 Cubed Conversion Kit Manual V1.0

K 030 X – 6 Cubed
Instruction Manual v1.0
Bag F
Finish It Up
Page 36
F9) SADDLE PACK Use the battery spacer foam (AE 9238) from your B
4.2 between the two saddle batteries to space them out to the edge of the
battery compartment. For pack forward (left photo) use only the rear two
hex stand-offs, adjusting them to hold the battery tight against the front of
the battery compartment. For pack back (right photo), use the front two
hexes.
SHORTY PACK Here you have more choice of placement. The pack
can go anywhere in the battery compartment.
Pack Forward Pack Center Pack Back
Only 2 rear hexes All four hexes Only 2 front hexes
F10) Put the Antenna Mount (left photo, XF 9001) on the bottom of the Top
Deck (XF 1503). The bottom of the top deck is the side with the two
countersunk holes (center photo) which accept the bracket of the optional
Transmission Brace (not included). Use the two 4-40 X 1/2” button head
screws and locking nuts. Mount and nuts on the bottom to clear the body.