XFCK030 X-6 Cubed Conversion Kit Manual V1.0

K 030 X – 6 Cubed
Instruction Manual v1.0
Bag E
Rear Suspension
Page 31
E5) Again, the right side first. Insert a hinge pin
you saved into a control arm from the rear.
Consult the Set-Up Sheet and Tuning
section to determine your hub spacing.
Here we have the two shims on the rear for
hubs forward. The shock mounting holes
are on the rear of the arm.
E6) Place the right hub (Marked R) on
the hinge pin and continue sliding the
pin forward. The two shims have
remained behind the hub (arrows).
E7) Secure the hinge
pin with the little 2-
56 X 1/8” button
head screw. Now
where the heck is
that little thing? If
you lose one, they
are XF 6053. Repeat for the
left side.
E8) Install a hinge pin bushing (XF 6142) in each side of the hinge pin brace.