XFCK030 X-6 Cubed Conversion Kit Manual V1.0

K 030 X – 6 Cubed
Instruction Manual v1.0
Bag E
Rear Suspension
Page 30
BAG E
REAR SUSPENSION
E1) Take the rear control arms (XF3012) from
Bag E and remove the gurfelmurgles
(arrows). Many drivers touch the arms
with a file here.
E2) We’ll do the right side first. Take
the C.V.A. out of the hub. The
bearings can stay in the hub,
though we suggest you clean and
inspect them now. Team drivers
install the X Factory CF Hub
Camber Plates (XF 9502) now.
They use the lowered plates in many set-ups.
E3) We will add two 0.010” Axle Spacers (XF 6450) inside of the inner bearing
in addition to the AE #7368 shim.
E4) Re-assemble the hub. The arrow shows the three shims. Repeat for the
left side.