XFCK030 X-6 Cubed Conversion Kit Manual V1.0

K 030 X – 6 Cubed
Instruction Manual v1.0
Bag C
Shock Tower
Page 24
BAG C
REAR SHOCK TOWER
C1) Install the wing mounts first. You will
need the Rear Shock Tower
(XF3315), Wing Mounts (XF 3500),
and Wing Mount Spacers (XF 6806).
C2) Place two 4-40 X 5/8” cap head screws
(long arrows) through the left wing
mount holes. There are two sets of
holes; here we are using the lower set.
Consult the Set-Up Sheet and Tuning
Section to determine which you want.
Then put two Wing Mount Spacers over
the bolts (short arrows).
C3) Install the one wing
mount, then the other.
C4) Place the Rear shock Tower (XF 3315) over
the Rear Bulkhead (XF1313). Make sure
the tower and bulkhead fit together properly
(arrow) and the bolt holes line up.