XFCK030 X-6 Cubed Conversion Kit Manual V1.0

K 030 X – 6 Cubed
Instruction Manual v1.0
Bag B
Nose Pieces
Page 22
B5) Now repeat the first four steps for the left
side.
B6) Let’s do both sides together now.
Put the Lower Nose Bridge
Stiffeners (XF 1535) over the 7/8”
flat heads. They should fit snugly
against the top deck support (short
arrow).
B7) Guess what? Now the Top Nose
Bridge Stiffeners (XF 1536) Again,
nice and snug against the top deck
support (short arrow). Both sides,
please, even though the photo only
shows one.
B8) Get the nose piece (XF 1002) from Bag
B and touch it with a file if necessary to
clean up any mold flashing. The back
of it should be straight so there is no
interference with the chassis (long
arrow), and the post should be nice
and round (short arrow) to fit well with
the AE top plate. Before installing the
nose piece, check inst F14.
B9) Turn the chassis over and install the nose piece with the post to the top of
the chassis. Use the four 5/8” Cap Head screws (XF 6003).