XFCK030 X-6 Cubed Conversion Kit Manual V1.0

K 030 X – 6 Cubed
Instruction Manual v1.0
Bag B
Nose Pieces
Page 21
BAG B
NOSE PIECE
B1) Place a 5/8” flat head screw (XF 6024) you saved from inst. # 12 up from
the bottom of the chassis in the second hole from the front at the outside
of right side of the chassis (short arrow). Place a 7/8” flat head screw (XF
6026) from Bag B up through the front outside hole (long arrow).
B2) Place a Nose Bridge Spacer (XF 1534) over
the two bolts.
B3) Place a Nose Bridge (XF 1533) over the
screws onto the spacer, curved side out.
B4) Using a 3/8” Flat Head screw (XF 6022) from Bag B (arrow) and the 5/8”
flat head, install a Top Deck Support (XF 1400). If you are using thread
lock, a drop now in the bottom holes of the support.