XFCK030 X-6 Cubed Conversion Kit Manual V1.0

K 030 X – 6 Cubed
Instruction Manual v1.0
Bag A
Transmission Assembly
Page 20
A27) Install the spring (AE9739) on the shaft so it fits into the slipper plate’s
hub, then place the black retainer (AE7486) over the spring, flat side up.
Install the 5-40 nut (XF6074) to hold it all together, tightening until there is
one thread of the shaft showing. Final adjustment later.
That’s it for the hardest, longest bag. All downhill from here!
Set the trans aside and we’ll do the front end.