User Manual


ConnectionInstructions
TheS-BUSoutputcomeswithfullfunctionswhichhavebeendefinedchannelnumber:
Channel1:ROLLControl 
Channel2:ReturntoHOME
Channel3:TILTControl
Channel4:YAWControl
Channel5:Modeswitch

Therecommendoperationmethods
1.Singlecontrol:JustconnectPPMchannelforHEADFOLLOWING,HEADLOCKandAUTOBACKTOHOMEmode,S-BUSchannel
connectionisnotrequired,Onereceiveronly.
2.Dualcontrol:OnlyS-BUSoutputchannelmodeprovidesfullfunctions.But2receiversarerequired
Notice:Itdoesnotrequiredtosupplythepowertothereceiverwhenunderdualcontrolmode,theA10-3Hcontrollerwillsupplythe
powertothereceiverviatheS-BUS.

TheAVoutputadapterindicator:diagram


You may connect your own
video transmitter here , the
YELLOWwireisthevideo
signalandthePINKwireis
GND
