User Guide

Dear valued customer,
Thank you very much for you order. As a professional inverter manufacturer,we devoted
to specialize in pure sine wave inverter, which is full power as it rated.
Here are some tips for your reference:
1.Please use the standard battery cables which we sent. If 4 cables, please use them
all, or the output will only be about a half. And the spare fuses sent with the package
are just used when the original ones are burned by accident. If any missing parts,
please contact with me freely.
2.Dont connect the inverter with grid power, and a reverse connection of positive
and negative is also forbidden. Or the inverter may have a permanent damage.
3.Please do not overload. If your applications are inductive load, please choose
the inverter whose continuous power is 3-7 times higher than the watts of your
appliances. If you want to power up a refrigerator, we suggest you use 10 times higher
power inverter.
4.Please turn off the load first then turn off your inverter, otherwise the inverter
may broken down. And as there is a soft start function, please turn on the inverter
first then turn on your loads, or the output may be not stable at the first seconds.
5.When there is a red light and flashing, please check if your input voltage is high.
Normally add some loads or change a longer battery cables can solve this problem.
6.If the inverter you ordered comes with a remote,please note the battery of remote
controller is taken off because of shipping concerns.Its specification is 23a
12v.And If turn on by remote control, it is only turned off by remote control. If
by switch on the inverter, turn off by switch.
Please check the attachment about usage,we are always here for you to solve your
problems and take responsibility of our products, millions thanks.
Sincerely and yours,
Reliable Customer Service

Summary of content (1 pages)