User's Manual

WYZELS1-KSZP01 V1.0 灯口说明书 105g无光铜
IN THE BOX
Wyze Lamp Socket
USB Cable
Clips ×6
This is an expansion kit. You need to have a starter
bundle or install a Wyze Cam v3 together with this
lamp socket to be able to control this socket from the
Wyze app.
GET STARTED
Screws
×6
Wall Anchors
×6
USB Cable*
2
3
This device complies with Part 15 of the FCC
Rules / Industry Canada licence-exempt RSS
standard(s). Operation is subject to the
following two conditions: (1) this device may not
cause harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
FOR BOTH FCC & IC
APPLICATION:
User Manual Version: V1.0
BASIC SPECIFICATIONS
Lamp socket base type: E26
Lamp socket input voltage: 120V~, 60Hz
USB output voltage: DC 5V/1A MAX 5W USB1.1
Lamp socket output voltage: 120V~, 60Hz
Maximum Power: 30 W
Wireless: 2.4 GHz
Operating temperature: -4℉~120℉(-20°C~50°C)
This product is not waterproof and must be
used with an enclosure.
Make sure your lamp socket output is 120V.
Before installing, turn off the power to the
light fixture. Do not touch the metal
components of the lamp.
ATTENTION:
If installing multiple Wyze Lamp Sockets,
turn them on within 30 seconds of each
other to group them together.
Use the Wyze app to manage your lamp
socket's settings.
Before going further, cut the power to
your lamp socket and unscrew the
existing light bulb.
3
Screw the light bulb into the
E26 base of the lamp socket.
Note: Only bulbs with < 30 W
can be used.
4
Open the dust cover and plug in the USB
cable.
5
BASIC OPERATION
Setup
In the Wyze app, open your Wyze Cam v3. If
installed properly, your Wyze Lamp Socket will
be automatically added as an accessory.
Secondary lamp sockets must be installed
within 82 feet of the primary lamp socket to
be grouped together.
In your Wyze Cam v3 Settings, open
Accessories > Lamp Socket to adjust your lamp
socket settings.
Daily use
Daily use the AUTO | On | Off functions in the
Wyze app to control when the lamp socket
turns on and off.
Each grouped lamp socket will update with
your changes.
AUTO: Select Always for the lamp socket to
turn on automatically when it is dark. Select
Motion is detected by camera for it to turn on
when the camera detects movement in low
ambient light.
On: Turns the lamp socket on.
Off: Turns the lamp socket off.
NEED HELP?
Contact our Support Team:
https://wyze.com/support
Join our Community:
https://wyze.com/community
Scan the QR code
to learn more
Note: Please use
the USB cable
included in this
package. Do NOT
use original Wyze
Cam v3 cable.
Screw your Wyze
Lamp Socket into
the E26 base and
position your USB cable.
6
Plan the route to run the USB cable to the
place you want to position the your Wyze
Cam v3. You can use USB cable clips to route
your USB cable. You can use tape or screws to
secure the clips.
If you want to use tape, please remove the
protective film at the back of the clip and
press it firmly to the wall. Wait for 10 minutes
before putting the cable inside the clip.
7
If you want to anchor the cable clips using
screws, please first drill a hole on the wall using
Φ4.0 drill bit. Then insert and insert the anchor
into the hole. Screw the clip onto the wall.
Connect the USB cable to the your Wyze
Cam v3. Make sure it is connected securely.
8
Place the USB cable in the USB cable clip.
9
1
DEVICE NETWORKING
Lamp sockets that you want to group
together should be within 82 feet of the
socket with the camera.
When Wyze Cam v3 is connected to a Wyze Lamp
Socket, it can control up to 4 nearby Wyze Lamp Sockets
within 82 feet.
MAX 82 feetMAX 82 feet
Primary Socket
Secondary Socket
After connecting the wires, restore power to
the lamp socket. The light bulb will turn on
and your Wyze Cam's status light will flash red.
10
Installation complete! You can now control your
new lamp socket with your Wyze Cam v3.
12
Stick the sticker next to the switch to avoid
switching the light off accidentally.
11
Download the Wyze app and sign in or
create an account.
If you are installing Wyze Lamp Socket for the
first time, please follow the next steps to
install it.
If you have already installed a Wyze Lamp
Socket at this location, you can repeat steps
3, 4, and 6 to install the expansion.
Check WiFi Signal Strength
● Connect your phone to your 2.4 GHz
network. Do not use your phone's data
connection.
● Move your phone to where you'll install
the Wyze Cam v3 to check your WiFi's
signal strength.
2
1
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced
radio/TV technician for help.
MPE Requirements
To satisfy FCC / IC RF exposure requirements, a
separation distance of 20 cm or more should
be maintained between the antenna of this
device and persons during device operation.
To ensure compliance, operations at closer
than this distance is not recommended.
Les antennes installées doivent être situées de
facon à ce que la population ne puisse y être
exposée à une distance de moin de 20 cm.
Installer les antennes de facon à ce que le
personnel ne puisse approcher à 20 cm ou
moins de la position centrale de l’
antenne.
La FCC des éltats-unis stipule que cet appareil
doit être en tout temps éloigné d’au moins 20
cm des personnes pendant son functionne-
ment.
Region Selection
Limited by local law regulations, version for
North America does not have region selection
option.
2021.4.22
V1.0 首次创建
2021.4.25
V1.0 修改1
2021.4.25
V1.0 定版
2021.6.7
V1.0 增加认证警语
型号：WYZELS1
规格：WYZELS1-
KSZP01 V1.0
55*55mm
Wyze Lamp Socket
于树媛