Specifications

24 Chapter 4
Configuring WDM Properties
Use the WDM Properties dialog box (Control Panel > WDM icon) to configure the Wyse
Device Manager server location and thin client settings.
1. Configure Server settings:
• Enter the IP Address or hostname of the WDM server.
• Enter the Port to use (default is 80).
• (Optional) If you are using HTTPS, enter the Secure Port to use (default is 443).
2. Configure Client settings:
• Enter the Server Connection Retry Attempts (number of attempts to connect to the
WDM server after a failed attempt).
• Enter the Interval Between Retry Attempts (number of seconds between attempts to
connect to the WDM server after a failed attempt).
3. Click OK.
For information on Wyse Device Manager software, see "Using Wyse Device Manager
Software for Remote Administration."
Enabling and Disabling Automatic Logon Using Winlog
Automatic logon to a user desktop is enabled on the thin client by default. Use the Winlog
dialog box (Control Panel > Winlog icon) to enable or disable Auto Logon, and to change
the default User name, Password, and Domain for a thin client.
CAUTION: To save the settings so that they persist after a thin client reboot, be sure to
flush the files of the File Based Write Filter cache (see "Before Configuring Your Thin
Clients").