Specifications

14 Chapter 3
pressure-sensitive touch pad. This double-tapping on the touch pad will select the
desired item and prompt the software to perform the related operation.
4. The buttons located directly below the touch pad are the same in function as those on
a two-buttoned mouse. Clicking these buttons makes selections, drags objects, or
performs a variety of other functions depending on the software. To select an object,
first move the pointer over the object you want to select, and then press the left button
one time. The functions of these buttons are software specific.
5. Double-clicking is a common technique for selecting objects or launching programs
from icons. Once you have moved the pointer over the object you wish to select,
rapidly press the left button two times. This action is commonly referred to as
“double-clicking” an object.
Dragging
There are two ways to drag:
• Move the pointer to the desired location then press down the left button. While still
holding down the left button, move the pointer to the desired location. Release the
button.
• Move the pointer to the desired location. Tap the touch pad twice quickly as if you were
double-clicking; however do not remove your finger after the second tap. Move the
cursor to the desired location. Lift your finger to finish dragging.
Adjust the touch pad settings by selecting Settings | Control Panel | Mouse | Buttons.
These settings allow you to change the orientation of the touch pad from right-handed to
left-handed and fine tune the pointer movement and timing of clicks.
Scrolling
If you are scrolling through a document, you may find that using the scrolling line is more
restful to your hand than holding down a mouse button. Scrolling lines are located on the
touch pad.
Touch Pad Precautions
The touch pad is a pressure-sensitive device. If not properly cared for, it can be easily
damaged. Please take note of the following precautions:
• Make sure the touch pad does not come into contact with dirt, liquids or grease.
• Do not touch the touch pad if your fingers are dirty.
Do not rest heavy objects on the touch pad or the touch pad buttons.
Connecting a Printer
To connect a printer to your thin computer via the USB port, you will need a USB-to-printer
adapter cable. Before use, you may need to install the driver for the printer.