Installation Guide Wyse X Class 2 and 4-GB RAM Upgrade Option Kit ® Products: X90mw, X90m7 Issue: 122211 PN: 883884-34L Rev.
Copyright Notices © 2011, Wyse Technology Inc. All rights reserved. This manual and the software and firmware described in it are copyrighted. You may not reproduce, transmit, transcribe, store in a retrieval system, or translate into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of this publication without express written permission.
Contents 1 Introduction 1 Kit Contents 1 Kit Warranty 1 Wyse Technical Support 2 Related Documentation and Services Wyse Online Community 2 2 Installing X Class RAM 3 Requirements 3 Procedures 3 2
iv Contents This page intentionally blank.
1 Introduction This guide provides step-by-step instructions to upgrade the RAM in the following Wyse X class thin clients: • X90mw • X90m7 Kit Contents The kit includes a RAM module. Kit Warranty The warranty on this kit assumes the remaining months of warranty of the mobile thin client in which it is installed, or for 90 days, whichever is greater. Installation of this kit will not void the factory warranty, however the user will be responsible for damage due to improper installation.
2 Chapter 1 Wyse Technical Support To access Wyse technical resources, visit http://www.wyse.com/support. If you still have questions, you can submit your questions using the Wyse Self-Service Center at http://support.wyse.com/selfservice.html or call Customer Support at 1-800-800-WYSE (toll free in U.S. and Canada). Hours of operation are from 6:00 A.M. to 5:00 P.M. Pacific Time, Monday through Friday. To access international support, visit http://www.wyse.com/global.
2 Installing X Class RAM This chapter contains information for users of Wyse X class mobile thin clients who must install new RAM. Requirements • Small Phillips screwdriver Warning RAM modules may be susceptible to damage by Electro-Static Discharge (ESD). All industry-standard cautions should be followed to avoid ESD. Before you remove or install a module, touch any metal part of the chassis and keep that contact with the chassis during the installation process.
4 Chapter 2 4. Lift the bottom cover to remove it and expose the RAM module as shown in Figure 2. Figure 2 Inserting RAM module Warning RAM modules may be susceptible to damage by Electro-Static Discharge (ESD). All industry-standard cautions should be followed to avoid ESD. Before you remove or install a module, touch any metal part of the chassis and keep that contact with the chassis during the installation process. 5. Insert the new RAM module into the empty RAM module connector.
Installing X Class RAM This page intentionally blank.
Installation Guide Wyse® X Class 2 and 4-GB RAM Upgrade Option Kit Issue: 122211 Written and published by: Wyse Technology Inc.
