User's Manual

Setting Up the Thin Client 47

5. Select Enable the Printer Device.

6. Set up the application server as described in either “Setting Up Windows NT4 Servers”

or “Setting Up Windows 2000/2003/2008 Servers” .

Setting Up Windows NT4 Servers

1. Navigate to Control Panel | Network | Services and ensure that the Microsoft TCP/IP

Printing service is installed. If it is not, install it using the Microsoft installation

instructions.

2. Add the thin client as the LPD printer by completing the following:

a. Nav

igate to Control Panel | Printers | Add Printers | My Computer | Add Port

and double-click LPR PORT (if you do not see LPR Port, ensure that the Microsoft

TCP/IP Printing service is installed correctly).

b. T

ype the thin client IP address or DNS name in the Name or address of host

providing LPD box.

c. T

ype the printer name (assigned in “Configuring LPD Services” ) in the Name of

printer on that machine box.

d. Click

OK, and then click NEXT.

3. Af

ter you have selected the printer, you can perform your normal printer setup for the

application server. For example, select the manufacturer printer type and printer name.

Setting Up Windows 2000/2003/2008 Servers

1. Navigate to Control Panel | Administrative Tools | Services and ensure the

Microsoft TCP/IP Printing service is installed. If it is not, install it using the Microsoft

installation instructions.

2. Add the thin client as the LPD printer by completing the following:

a. Nav

igate to Control Panel | Printers | Add Printers | Local Printer | Create a

new port and select LPR PORT.

Note

If you do not see LPR Port, ensure that the Microsoft TCP/IP Printing service

is installed correctly.

b. Type the thin client IP address or DNS name in the Name or address of host