User's Manual

46 Chapter 3
Figure 27 Printer Setup - Options tab
Use the following guidelines:
• De
fault Printer - Select the printer you want to be the default printer from the list.
• Enable .
print Client and Port - If you want to enable .print Client, select Enable .print
Client and then enter the Port.
Figure 28 Printer Setup - Help tab
The Help tab contains printer help information.
Configuring LPD Services
A thin client can be configured to provide LPD (Line Printer Daemon) services, making the
thin client a printer server on the network.
Set-up the thin client that is to provide LPD print services as follows:
1. Open the Network Setup dialog box (Desktop Menu | System Setup | Network) and
enter a static IP address for the thin client (ask your network administrator for an IP
address).
2. Open the Printer Setup dialog box (Desktop Menu | System Setup | Printer) and
select any of the listed ports.
3. Name the printer in the Printer Name box.
4. Select Enable LPD service for the printer.