User's Manual
40 Chapter 3
Use the following guidelines:
• Selec
t best display setting on DDC monitor - If the monitor is VESA DDC2B
(Display Data Channel) compatible, selection of this option allows the thin client to
automatically select the best resolution and refresh rate. If your monitor is not DDC
compatible, a Monitor does not support Plug and Play message is displayed (click OK
to acknowledge the message and remove it from the screen).
• DDC
table - If the monitor is VESA DDC2B (Display Data Channel) compatible,
selection of this option allows you to select the resolution and refresh rate you want
from the list.
• Use
r defined display setting - Select this option and select the resolution and refresh
rate supported by your monitor (all combinations are allowed):
• Resolution
list selections include:
640 x 480
800 x 600 (default)
1024 x 768
1280 x 1024
1360 x 768
1400 x 1050
1440 x 900
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
• Refresh
rate list selections include:
60 Hz (default)
75 Hz
85 Hz
• Usage Help ar
ea - Contains brief instructions for using the Display Setup dialog box
and running the test. No operator entry can be made in this box. Make note of the
instructions in the area regarding v-key reset usage in case of display failure.
Configuring Dual Monitor Settings
(Supported Dual Monitor Capable Thin Clients Only) The DualHead Setup dialog box
allows you to configure the way two monitors display.
Figure 22 DualHead Setup
Use the following guidelines:
• Dual Head - Select Disab
le to have the two monitors work in a matching state, or
Enable to have the two monitors work separately (second is extended from first).