User's Manual

Getting Started 23
• Display Resolution - Select the display resolution for this connection (if you select the
Published Application option, the Connection Display will allow you to select the
Seamless Display Resolution option):
• Default
• 6
40 x 480
• 8
00 x 600
• 10
24 x 768
• 12
80 x 1024
• 13
60 x 768
• 14
00 x 1050
• 14
40 x 900
• 16
00 x 1200
• 16
80 x 1050
• 19
20 x 1080
• 19
20 x 1200
• Colors
- Select the color depth of the ICA session. If High Colors (16bits) or True
Colors is selected and the ICA server does not support this color depth, the thin client
renegotiates the color depth to the lower value (for example, 256 Colors [8 bits]).
• W
indow mode and Full screen mode - Select the initial view of the application in a
windowed screen or full screen. You can toggle between viewing modes by using
CTRL+ALT+UPARROW.
• Aut
o-connect on start-up - When selected, automatically connects the session on
start-up.
• Re-
connect after disconnect - When selected, causes the thin client to automatically
reconnect to a session after a non-operator-initiated disconnect. If selected, the wait
interval is that set in the Delay before re-connecting box or the user profile for yes
(20 seconds) or seconds. The default is 20 seconds if there is no INI file description of
this connection, or is a Stand-alone user, or simply omitted.
• T
urn compression off - When selected, turns compression off (intended for
high-speed connections).
• Optimiz
e for low speed link - When selected, allows optimization for low-speed
connections, such as reducing audio quality and/or decreasing protocol-specific cache
size. Intended for a connection spanning a WAN link or using dialup.
• Ma
p all disks under (z:) - When selected, maps all disks under the Z drive.
• Ena
ble session reliability - When enabled, session reliability allows a user to
momentarily lose connection to the server without having to re-authenticate upon
regaining a connection. Instead of a user’s connection timing out after X seconds, the
session is kept alive on the server and is made available to the client upon regaining
connectivity. Session reliability is most relevant for wireless devices.
• Aut
o-connect to local devices - Select any options (Printers, Serials, USB, Smart
Cards, Sound, and Disks) to have the thin client automatically connect to the devices
(an ICA session will not automatically connect to a device through a serial port).
• Delay before
re-connecting - Becomes active if Re-connect after disconnect is
selected. Enter the number of seconds (1 to 3600) before trying to reconnect after a
disconnect.
• M
ouse queue timer - Specifies the default queue timer of a mouse event in an ICA or
RDP session (in 1/100 of a second). It can be used to adjust the bandwidth of a
network.