User's Manual

Getting Started 15
• Display - Allows you to configure the monitor resolution and refresh rate. For more
information on the Display Setup dialog box, refer to "Selecting Display Settings."
• Dual Head
- (Supported Dual Monitor Capable Thin Clients Only) Allows you to
expand the monitor display to two screens. For more information on using the
DualHead Setup dialog box, refer to "Configuring Dual Monitor Settings."
• Ser
ial - Allows configuration of the ports for modem dialup mode and serial
communications. For more information on the Serial Setup dialog box, refer to
"Configuring Serial Communications."
• Printer - Allows
configuration of network printers and local printers that are connected
to the thin client. For more information on the Printer Setup dialog box, refer to
"Setting Up Printers."
• TCX Licen
se - Allows use of Wyse
®
TCX Software™ to provide an enrichment layer
above ICA and RDP connections that enable multiple monitor awareness, rich
multimedia playback, high quality bidirectional audio capabilities, and seamless USB
device access for Wyse thin clients. For more information on using the TCX License
dialog box, refer to "Adding and Deleting TCX Licenses Manually."
• T
ouch Screen - Allows configuration of Serial and USB touch screens from ELO,
MicroTouch (Model M150 only), or FastPoint. For more information on Touch Screen
setup, refer to "Configuring Touch Screens."
Accessing System Information
Selecting System Information in the Desktop menu opens the System Information
dialog box.
The following information is available:
• General T
ab - Displays general information such as System Version, Serial Number,
Boot From, Memory Size (Total and Free), Terminal Name, IP Address, Net Mask,
Gateway, and DHCP Lease.
• De
vices Tab - Displays information about devices such as the CPU Speed, ROM Size,
Monitor, Parallel Ports, Ethernet Speed, Memory Speed, NAND Size, Resolution,
Serial Ports, and the thin client MAC Address.
• Copy
right/Patents Tab - Displays the software copyright and patent notices.
• Eve
nt Log Tab - Displays the thin client start-up steps (normally beginning from
System Version to Checking Firmware) or error Messages that are helpful for
debugging problems.
• S
tatus Tab - Displays status information about TCP performance-related parameters,
CPU Busy, System Up Time, Wireless performance-related parameters, Free Memory,
and DHCP lease time remaining.
Accessing Available Applications
Applications is an additional Desktop menu option that is available. Applications contains
a submenu of all locally configured applications and is populated with published
applications when a user is signed on using either PNLite or PNAgent.
Accessing the PPPoE Manager
Selecting PPPoE Manager in the Desktop menu opens the PPPoE Manager and allows
you to configure or start PPP connection over Ethernet to a DSL modem. The terminal can
be configured to run PPPoE to connect to WANs through DSL modems to eliminate the
need of installing a DSL router between the terminal and the DSL modem. You can also
use the PPPoE Manager to automatically open a connection on system start-up. For more
information on the PPPoE Manager, refer to "Configuring PPPoE Access."