Installation guide

1 Introduction
This guide enables users of Wyse SX0 thin clients to install 512 MB RAM and 512 MB
Flash upgrades and convert their thin client to the Windows XPe operating system.
About this Guide
This guide is intended for users of Wyse SX0 thin clients.
The information in this document is intended for the following conversions:
• S30 to S90
• S50 to S90
The software loaded on the thin client will be latest released version of Windows XPe.
Organization of this Guide
This guide is organized as follows:
Chapter 2, "Getting Started," provides information about the conversion kit warranty, kit
contents, required tools, and how to remove the thin client’s cover.
Chapter 3, "Installing the 512 MB RAM Module," describes how to install the 512 MB RAM
kit in a Wyse SX0 thin client.
Chapter 4, "Installing the 512 MB Flash Module," describes how to install the 512 MB
Flash kit in a Wyse SX0 thin client.
Chapter 5, "Converting to the Windows XPe Operating System," provides information on
converting Windows CE or the Wyse Linux operating system of your Wyse SX0 thin client
to the Windows XPe operating system.
Wyse Technical Support
To access Wyse technical resources, visit http://www.wyse.com/support. If you still have
questions, you can submit your questions using the Wyse Self-Service Center
, or call
Customer Support at 1-800-800-WYSE (toll free in U.S. and Canada). Hours of operation
are from 6:00 A.M. to 5:00 P.M. PST, Monday through Friday.
To access international support, visit http://www.wyse.com/global
.
Related Online Resources Available at Wyse
Wyse thin client features can found in the Datasheet for your specific thin client model.
Datasheets are available on the Wyse Web site at: http://www.wyse.com/products
.