Installation guide

iii
Thin Client Requirements Compliance
FCC Compliance
Model SX0 thin clients meet Class B requirements.
IEC/EN Compliance
Model SX0 thin client meet Class B requirements.
Canadian DOC Notices
Refer to the previous section, "Thin Client Requirements Compliance," to find out to which Thin Client model each
of the statements below refers.
Class A
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
Class B
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
IEC/EN Notice
This product conforms to the requirements of IEC950 and EN60950.
This product conforms to requirements of EN55022 for Class A equipment or EN55022 for Class B equipment
(refer to "Thin Client Requirements Compliance").
Cable Notice
The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or
host devices. Failure to do so may cause interference and violate FCC and international regulations for
electromagnetic interference.
Device Power Supply
For use with external power supply included in the shipping carton, or a certified equivalent model supplied by the
manufacturer.
Model SX0 Thin Clients
For use with External Power Supply Model DSA-0421S-12 3 30, or certified equivalent model supplied by the
manufacturer, output rated 12Vdc, 2.5A.