Installation guide

12 Chapter 5
Installing the XPe Conversion
Complete the following steps to install the XPe operating system in your thin client.
Preparing the PC for the Conversion
The conversion process requires a standalone Windows XP Pro PC configured with the
Wyse Simple Imager 1.x.x (WSI).
Step 1 – Installing Wyse Simple Imager
Install Wyse Simple Imager 1.x.x (WSI) on your PC using the Quick Start Guide
instructions included in the zip file.
Note
Step 2 assumes WSI is correctly installed and configured.
Step 2 – Inserting the S90 Conversion Image
From the WISard Conversion Package folder, copy the 1S92 folder to the WSI installation
directory. Typically this is C:\Inetpub\ftproot\Rapport\Tools\sa.
Step 3 – Installing the Conversion Image
The following is an overview of the steps required for installing the conversion image.
Note
For complete instructions on using WSI, refer to the WSI Quick Start Guide.
1. Copy the XPE ”.i2d” file to any directory on the WSI server.
2. Start WSI.
3. Select the S92 product from the Select Product menu scroll list, and then click the
Add button.