Specifications

48 Chapter 3
Reconnect={yes, no, 1 to 3600
(seconds)}
Parameter Value and Action
yes — Restart the connection after 20 seconds
when disconnected. Default delay time for
reconnect is 20 seconds.
no — (default) No re-connection after a
disconnect.
seconds — (integer) Interval to wait (in seconds)
before automatically restarting the connection
after disconnection. Valid range is 1 to 3600.
Resolution=[default, 640x480,
800x600, 1024x768, 1280x1024,
1600x1200]
Maximum connection resolution. Use this setting
to restrict the highest resolution for connections.
The thin client will operate at the lesser of this
setting and resolution specified at the connection
entry.
The default setting default starts the connection
using the current desktop display setting with no
window frame and border. If the connection is to a
published application, then the Seamless
selection is available. For Seamless connections
(applicable to ICA only), the Metaframe hosts
select the connection window size that best fits
the applications.
Smartcards={no, yes} ICA and RDP. Specifies to use a smart card login
server when the connection starts. The default is
no.
UnmapPrinters={no, yes} ICA and RDP. Specifies to auto-connect to local
printers when the connection starts. The default is
yes.
Table 4 ICA and RDP Connect Parameter List, Continued
Command/Parameter Description