Specifications

System Administration 45
ICA and RDP Connect Parameter List
Table 4 lists the ICA and RDP Command/Parameter and Description set.
Table 4 ICA and RDP Connect Parameter List
Command/Parameter Description
Alternate=[no, yes] ICA Only.Yes/no choice to use an alternate IP
address returned from an ICA master browser to
get through firewalls. Default = no.
Autoconnect={0-99} Set to 1 to start a connection automatically
(after sign-on, if sign-on is enabled). Default = 0.
The value of 0-99 is the delay in seconds before
auto-starting the session.
Browserip=list of browsers ICA Only. List of IP addresses or DNS registered
names to specify ICA browsers. List items must
be separated by semicolons or commas.
Colors={256, 32k, 64k or high,
16m, true}
Session color mode. Default = 32k. For faster
display performance, use 256 colors for the
session. 64k = high.
NOTE: Although the default is 32k colors, older
ICA servers may not support the 32k mode. In this
case, the thin client will negotiate with the server
and run the session in the 256 color mode (high
colors in ICA requires that the server be running
MetaFrame 1.8 FR2 or higher). There is continued
support for 64k colors. The thin client supports
high colors for RDP as long as the server supports
RDP version 5.x or higher.
Command=start command A string of commands to be executed after logging
on to the server. This entry is limited to 127
characters.
Console={no, yes} RDP Only. Set to yes to login to a session in
Console mode.
Note: If Console=yes is set behind the RDP
connection, the Time Zone redirection feature will
be disabled.
Description=string description Connection description. Enclose in quotation
marks if there are embedded blanks or single
quotes. For quotation marks, use
common-practice nesting rules. Up to 19
characters are allowed for this entry.
Directory=working directory A directory to be used as the working directory
after logging on to the server. This entry is limited
to 63 characters.
Domainname={domain
name,$DN}
Domain name in a Windows network. Up to 31
characters are allowed for this entry. $DN
specifies that the thin client sign-on domain name
is used.