Specifications

42 Chapter 3
**Reconnect={yes, no} Establish the default setting of Reconnect for all types of
connections. This setting in wnos.ini will be saved into
nvram if EnableLocal is set to yes in wnos.ini.
**RepeatDelay={0, 1, 2, 3, 4, 5,
6, 7}
Value and Keyboard Delay Before Repeat (seconds)
0 — 1/5
1 — 1/4
2 — 1/3 (default)
3 — 1/2
4 — 3/4
5 — 1
6 — 2
7 — No Repeat
**RepeatRate={0, 1, 2} Value and Keyboard Repeat Rate
0 — Slow
1 — Medium (default)
2 — Fast
*Resolution=[DDC, 640x480,
800x600, 1024x768,
1280x1024, 1600x1200]
[Refresh=60, 75, 85}
Set local display resolution and refresh rate.
If set in wnos.ini, the statement in {username}.ini will be
invalid.
**ScreenSaver={0, 1, 5, 10, 20,
30, 60, 120, 180}
[LockTerminal = {0, 1, 2}]
[Type = {0,1,2}]
[Image = imagefile
Value and Delay Before Starting
0 — Disabled
1 — 1 Minute
5 — 5 Minutes
10 — 10 Minutes
20 — 20 Minutes (default)
30 — 30 Minutes
60 — 1 Hour
120 — 2 Hours
180 — 3 Hours
The optional parameter LockTerminal specifies to put the
thin client in a LOCK state when the screen saver is
activated. The user will be prompted with a dialog box to
enter the sign-on password to unlock the thin client.
Default = 0. When LockTerminal=2, the unlock window
will not be moved and the desktop will black out. If
EnableLocal=yes and it is set in wnos.ini, the state of
LockTerminal will be saved into nvram.
NOTE: The user must be signed on with a password for
this action to take effect.
The optional parameter Type specifies which type of
screensaver to use. 0=Blank the Screen, 1=Flying
Bubbles, 2=Moving Image.
The optional parameter imagefile is to specify an
imagefile residing in the subfolder bitmap under the
home folder.
NOTE: If type is set to 2 and no image file is specified
then the default Wyse logo image is used.
Table 3 wnos.ini and {username}.ini , Continued
Command/Parameter Description