Specifications

38 Chapter 3
**LowBand={no, yes} Establishes the default setting for all connections.
yes or no choice to enable optimization for low speed
connections, such as reducing audio quality and/or
decreasing protocol-specific cache size. Default = no
(disabled). This setting in wnos.ini will be saved into
nvram if EnableLocal is set to yes in wnos.ini.
**MouseSpeed={0,1, 2} Value and Mouse Speed
0 — Slow
1 — Medium (default)
2 — Fast
**MouseSwap={0, 1} Value and Mouse Swap
0 — No (default)
1 — Yes
NetworkPrinter=host/queue
[PrinterID=Window driver
name]
[Enabled={yes, no}]
Specifies the configuration for the network (LPD) printer
in the same way as described for the Printer Setup
dialog box in the Users Guide: Wyse
®
Winterm
TM
1
series Based on Wyse Thin OS. The host and queue
parameters define the IP address and queue name of
the printer; PrinterID defines the Windows printer driver
name; The clause of Enabled={yes, no} is optional with
the default set to yes.
**NoReducer={yes, no} Establishes the default setting of compression off for all
types of connections.
**Password = sign-on
password
In wnos.ini - If set to the default password, the system
will sign on automatically and not wait for username,
password, and domain entries.
In [username].ini - Be sure it is the encrypted password
of the user or the system will fail to sign on. This can be
changed by a user, if allowed, in the Sign-on dialog box.
Table 3 wnos.ini and {username}.ini , Continued
Command/Parameter Description