Specifications

32 Chapter 3
TimeZone=zone
[ManualOverride={yes, no}]
[daylight = {yes, no}]
[start=mmwwdd end=mmwwdd]
[TimeZoneName=timezonename]
[DayLightName=daylightname]
This statement is valid if the zone is Unspecified
on the thin client or with the ManualOverride
option parameter. The allowable zones are
referred to in the menu list in the System
Preference dialog box such as: ‘GMT – 12:00’ to
‘GMT + 13:00’ at one hour increment, ‘GMT +
03:30’, ‘GMT + 04:30’, ‘GMT + 05:30’, ‘GMT +
05:45’, ‘GMT + 06:30’, ‘GMT + 09:30’, ‘GMT –
3:30’ and ‘Greenwich Mean Time’.
The option parameter ManualOverride overrides
the terminal System Preference Menu setting with
this TimeZone wnos.ini file setting.
If EnableLocal=yes is set in wnos.ini, the
TimeZone setting in wnos.ini will be saved into
nvram.
The option parameter Daylight is to enable/
disable the daylight saving. The mmwwd is a 6
digit number to specify the start and the end of
daylight saving.
Mm – 01 to 12 for the month of the year from Jan.
to Dec. For example, 01 is January.
Ww – 01 to 04 for the week of the month, 05 is the
last week. For example, 01 is 1st week.
Dd – 01 to 07 for the day in the week from
Monday to Sunday. For example, 01 is Monday.
The parameter daylight, start and end must be
specified as their sequence.
The option parameter TimeZoneName is the
display name sent to the ICA/RDP session such
as Eastern Standard Time.
If the time zone enables the daylight saving, the
option parameter DayLightName should be
something like Eastern Daylight Time, otherwise it
should be the same as TimeZoneName.
VncPassword = password Specifies a string of up to 16 bytes as the
password for shadowing.
Table 2 wnos.ini Only, Continued
Command/Parameter Description