Specifications

System Administration 31
SignOn={yes,no, NTLM}
[MaxConnect=max]
[ConnectionManager={maximize,
minimize, hide}]
[EnableOK={yes,no}]
[DisableGuest={yes,no}]
[DisablePassword={yes,no}]
Yes/no choice to enable the sign-on process.
Default=yes (enabled). If set to NTLM, user can
be authenticated with NTLM protocol.
The optional keyword MaxConnect sets the
maximum number of connects allowed to be
specified in the wnos.ini and username.ini
together. The range allowed for the max is 100 to
1000. The default maximum is 216 entries.
The optional parameter ConnectionManager
sets the state of the Connect Manager during
sign-on.
The optional parameter EnableOK sets to show
the OK and Cancel command buttons in the
Sign-on dialog box.
The optional parameter DisableGuest sets
whether or not guest sign-on is disabled.
The optional parameter DisablePassword sets
whether or not to disable the password text box
and password check box in the Sign-on dialog
box.
Speedbrowser={on, off} Enables ICA Speedscreen Browser Acceleration
Function. Default=on.
SysName={client, DNS} If set to DNS, a reverse DNS name from the DNS
server is checked into the Wyse Device Manager
(formerly known as Rapport) server (by default,
the terminal name is checked in).
TcpTimeOut={1-255} The Tcp Timeout option configures the timeout
value of a TCP connection. The value must be
between 1 and 255 (which means the connection
timeout value is from 1x30 seconds to 255x30
seconds).
ThinPrintEnable={yes, no}
[Port=port number]
Set to no to disable the thinprint client.
The option Port sets the TCP port of thinprint. The
default is 4000. The port number must be less
than 65535.
Table 2 wnos.ini Only, Continued
Command/Parameter Description