Specifications

System Administration 29
DefaultUser=username Default sign-on user. Note that this user name is
displayed in the Sign-on dialog box and may be
either used or replaced.
DelCertificate={filename, all} Removes the named file from the nand flash or
from the memory. If DelCertificate=ALL, then all
certificates will be deleted from the flash.
DHCPOptionsRemap={yes, no}
[FileServer={128-254}]
[RootPath={128-254}]
[FtpUserName={128-254}]
[FtpPassWord={128-254}]
[RapportServer={128-254}]
[RapportPort={128-254}]
[PnliteServer={128-254}]
[DomainList={128 -254}]
[VDIBroker={128 -254}]
If DHCPOptionsRemap=yes, the following
parameters can be set (otherwise, they cannot).
The options value must be between 128 and 254.
Each value must be different. These options are
used to configure DHCP server tags for thin client
booting
DHCPVendorID = vendor Specifies the vendor ID used for DHCP.
DisableButton={yes, no} Disable power button.
DisableDomain={yes, no} Disable the drop-down domain list in the
PNAgent/PNLite Sign-on dialog box.
DomainList=List of NT domain
names
A list of domain names that will appear in the thin
client Sign-on dialog box as a selectable list to
help users in selecting the domain to sign on to
PNAgent/PNLite servers. Once specified, it is
saved in the non-volatile memory.
Enclose in quotation marks if spaces are included.
For example: DomainList=”North_America, SQA,
test-domain”
EnableGKey={yes, no} Enable or Disable G key reset. G key reset is
supported for Privilege=High.
FileServer={IP address, DNS
name}
This FTP server IP address or DNS name is
entered into thin client local setup (non-volatile)
and the thin client immediately uses this server to
access files. Note that the target file server must
support access using the same user ID as there is
no way to change user ID and/or password in the
ini files.
FormURL=URL to a file URL to a sign-on window form or a bitmap
filename displayed in the sign-on window under
the thin client home directory. If auto dial-up is
enabled, this statement is invalid. Default=Empty.
Table 2 wnos.ini Only, Continued
Command/Parameter Description