Installation guide

1 Introduction
This guide enables users of Wyse VX0L thin clients to install 512 MB RAM and 512 MB
Flash upgrades and convert their thin client to the Windows XPe operating system.
About this Guide
This guide is intended for users of Wyse VX0L thin clients.
The information in this document is intended for the following conversions:
• V10L to V90L
• V30L to V90L
• V50L to V90L
The software loaded on the thin client will be latest released version of Windows XPe.
Organization of this Guide
This guide is organized as follows:
Chapter 2, "Getting Started," provides information about the conversion kit warranty, kit
contents, required tools, and how to remove the thin client’s cover.
Chapter 3, "Installing the 512 MB RAM Module," describes how to install the 512 MB RAM
kit in a Wyse VX0L thin client.
Chapter 4, "Installing the 512 MB Flash Module," describes how to install the 512 MB
Flash kit in a Wyse VX0L thin client.
Chapter 5, "Converting to the Windows XPe Operating System," provides information on
converting the Wyse Thin OS, Wyse Linux, or Windows CE operating system of your
Wyse VX0L thin client to the Windows XPe operating system.
Wyse Technical Support
To access Wyse technical resources, visit http://www.wyse.com/support. If you still have
questions, you can submit your questions using the Wyse Self-Service Center
, or call
Customer Support at 1-800-800-WYSE (toll free in U.S. and Canada). Hours of operation
are from 6:00 A.M. to 5:00 P.M. PST, Monday through Friday.
To access international support, visit http://www.wyse.com/global
.