Specifications

22 Chapter 4
How to Import Thin Client Configurations
Tip
While you can use DHCP options to import configurations to the thin client,
you can also use the Import function on the thin client when needed. See
also
"Troubleshooting Devices that Cannot Locate Configuration Files."
To import and apply thin client configurations from a configuration file:
1. In the WCM Client, click Import Configuration to open the Import Configuration dialog
box.
2. Depending on the location of the configuration file, do one of the following:
• Local - If the configuration file is found locally on the thin client (such as a C: drive,
local network folder, or USB drive), select the Local option, and then select the
Filename (use the browse command button to locate and select the filename).
• Remote - If the configuration file is not found locally on the thin client (such as a
remote server location), select the Remote option, and then enter the required
information (Protocol, Server IP or URL, Port, Path, and the Username and
Password of the server).
3. (Optional) Select the Import configuration on every boot option to import the
configuration file on every thin client boot or logoff login.
4. (Optional) Click Save Settings to save the location settings for the next time you open
the Import Configurations dialog box.
5. After completing your import configurations, click Import to apply the configuration file
to the thin client as follows:
• Local - If the Local option is used, the configuration from the local file is applied
immediately.
• Remote - If the Remote option is used, the remote file is first downloaded and then
applied immediately.