Specifications

40 Appendix A
Rdp_No_Theme={no, yes} RDP Only. Yes/no option to disable the Theme feature (use yes to disable
the feature).
Rdp_No_Wallpaper={no, yes} RDP Only. Yes/no option to disable the Wallpaper feature (use yes to
disable the feature).
Reconnect={no, yes, 1 to 3600
(seconds)}
Controls automatic reconnection to an application after a server
disconnection.
yes — Use to restart the connection (the default delay time for yes
reconnect is 20 seconds).
no — Use to prevent re-connection after a disconnect.
1 to 3600 — Use an integer value of 1 to 3600 seconds to restart the
connection after the delay you want (for example, use 50 and the automatic
reconnection to an application will occur after 50 seconds).
Resolution=[default, Seamless,
VGA_resolution]
Specifies the connection display resolution.
default — Starts the connection using the current desktop display setting
with no window frame and border.
Seamless — (ICA only) Available for use if the connection is to a published
application. For Seamless connections, the MetaFrame hosts select the
best-fit connection window for applications.
VGA_resolution — The VGA resolutions you can use are listed according to
the following platforms:
1200/1125 platform use 640x480, 800x600, 1024x768, or 1280x1024.
S10 platform use 640x480, 800x600, 852x480, 1024x768, 1280x1024,
1360x768, 1400x1050, 1440x900, 1600x1200, or 1680x1050.
V10L platform use 640x480, 800x600, 1024x768, 1280x768, 1280x1024,
1440x900, 1600x1200, 1680x1050, 1920x1080, or 1920x1200.
SessionReliability={no, yes} ICA only. Yes/no option to enable session reliability.
NOTE: Wyse Thin OS thin clients do not support UDP browsing to obtain a
new configuration about session reliability on the server. The thin client
always connects to the default port.
Smartcards={no, yes} RDP only. Yes/no option to use a smart card login server when the
connection starts.
UniSession={ no, yes} Yes/no option to use a unisession (a connection will launch only once at a
time).
UnmapPrinters={no, yes} Yes/no option to auto-connect to local printers when the connection starts.
UnmapSerials={no, yes} Yes/no option to auto-connect to local serials when the connection starts.
UnmapUSB={no, yes} Yes/no option to auto-connect to local USB devices (Virtual USB) when the
connection starts.
Username=[username, $SYS_VAR] Username to log-in to the application server. Either a conventional log-in
username or a variable can be used. Maximum of 31 characters are
allowed.
The value of username is a conventional log-on username.
The value of $SYS_VAR is a system variable found in Table 1.
NOTE: The combination of all the variables such as $IP@$DN are also
supported.
Table 4 Parameters for ICA and RDP connections , Continued
Parameter
***
Required
Description