Specifications

38 Appendix A
Colors={256, 32k, 64k or high, 16m,
true}
Session color mode. For faster display performance, use 256 colors for the
session.
NOTE: 64k is the same value as high.
Older ICA servers may not support the 32k mode. In this case, the thin client
will negotiate with the server and run the session in the 256 color mode
(high colors in ICA requires that the server be running MetaFrame 1.8 FR2
or higher). There is continued support for 64k colors. The thin client
supports high colors for RDP as long as the server supports RDP version
5.x or higher.
Command=start command A string of parameters to be executed after logging on to the server. This
entry is limited to 127 characters.
Console={no, yes} RDP Only. Yes/no option to login to a session in Console mode.
NOTE: If Console=yes is set behind the RDP connection, the TimeZone
redirection feature will be disabled.
Description=string description Connection description. Enclose the string description in quotation marks if
there are embedded blanks or single quotes. For quotation marks, use
common-practice nesting rules. Maximum of 38 characters are allowed.
Directory=working directory A directory to be used as the working directory after logging on to the server.
Maximum of 63 characters are allowed.
Disablesound={no, yes, 2} or
{0, 1, 2}
Specifies whether or not to disable remote sound upon connection start.
NOTE: Disablesound=2 only works in RDP sessions and indicates that the
remote computer sound should be disabled at the remote computer.
Domainname={domain name,$DN} Domain name to use in a Windows network. $DN specifies that the thin
client sign-on domain name is used. Maximum of 19 characters are allowed.
Encryption={None, Basic, 40, 56, 128,
Login-128}
ICA Only. Connection security encryption level. The highest level is 128-bit
security (Login-128 option is 128 bit encryption for login only).The lowest is
None.
NOTE: The server must support the specified level of encryption or the
connection will fail.
Fullscreen={no, yes} Yes/no option to run the session in full screen. If Fullscreen=no then the
session runs in a windowed screen.
Host=[name, IP, $SYS VAR]
or
Application=published application
Host — A list of server hostnames or IP addresses to which the the thin
client will attempt to connect (the next server on the list is attempted if the
previous one failed). List items must be separated by semicolons or
commas.
NOTE: $UN (see Table 1) specifies that the sign-on user name is used and
should be set in a {username}.ini file. If set to Host=$UN in a {username}.ini
file, the hostname will display as the sign-on user name. If set to Host=$UN
in a wnos.ini file, the hostname will display as the default Start.
Application — For ICA Only and defines the published application to
launch. Application is required if no host is specified.
HttpBrowsing={no, yes} ICA Only. Yes/no option to select an http browsing protocol. Use
HttpBrowsing=no for User Datagram Protocol (UDP).
NOTE: This parameter is used to override the default method of browsing
established in the ICABrowsing parameter.
Table 4 Parameters for ICA and RDP connections , Continued
Parameter
***
Required
Description